Vardhman Industries

Processing PP and HDPE raffia waste requires highly specialized equipment. Standard granulators simply cannot handle woven sack waste—they choke on the stringy tapes, and the grinding process creates a massive cloud of micro-dust that ultimately blocks your extruder screens. The Raffia Scrap Cutting & Dust Removing Machine by Vardhman Industries is explicitly designed to solve this.

This machine allows operators to continuously feed fully tangled woven sacks, heavy FIBC waste, and loose raffia threads directly into the high-volume hopper. It instantly shreds the bulky material into clean, uniform strands. Simultaneously, a dedicated pneumatic suction hose—which connects to an external dust collection chamber—actively vacuums away the fine dust, leaving you with premium, extruder-ready regrind.

• Heavy-Duty Scissor-Cut Rotor: Designed with a high-shear, open-rotor cutting mechanism that slices through tough, tangled PP/HDPE fabric instantly without wrapping around the shaft or stalling the motor.

• Integrated Pneumatic Dust Extraction: Features a powerful, dedicated suction pipe connected directly to the cutting chamber. This hose connects to a dust collection chamber to actively pull dirt, micro-fines, and airborne dust away from the cut material.

• High-Volume Top Feed Hopper: Built with an oversized feeding chute that allows operators to easily load large, bulky handfuls of tangled raffia or full woven sacks without the need for pre-cutting.

• Rapid Side-Discharge System: The machine quickly ejects the clean, cut fibers through a wide discharge chute, preventing internal material build-up and allowing for high-speed continuous feeding.

• Vibration-Free Industrial Build: Constructed on a robust steel chassis to withstand the heavy impact of shredding thick woven fabrics over long 24/7 production shifts.

• 100% Tangle-Free Operation: Completely eliminates the need to stop production to manually cut away melted or tangled plastic strings from a choked grinder rotor.

• Protects Downstream Extruders: By actively vacuuming out the abrasive dust before it mixes with the regrind, you drastically reduce extruder screen blockages and improve your final Dana (granule) quality.

• Cleaner Factory Environment: The suction system and collection chamber capture the fine plastic powder that would normally float around the factory floor, ensuring a safer, breathable workspace for your operators.

• Labor & Time Efficient: Operators can continuously feed the machine at high speeds without worrying about jamming, maximizing your daily scrap recovery rate.

This specialized cutting system is the only reliable way to process:

• Woven Sack Waste: Used/Rejected PP cement bags, fertilizer sacks, and fabric rolls.

• Raffia Tape & Thread: Tangled extrusion edge trims, bobbin waste, and multi-filament yarns.

Processing PP and HDPE raffia waste requires highly specialized equipment. Standard granulators simply cannot handle woven sack waste—they choke on the stringy tapes, and the grinding process creates a massive cloud of micro-dust that ultimately blocks your extruder screens. The Raffia Scrap Cutting & Dust Removing Machine by Vardhman Industries is explicitly designed to solve this.

This machine allows operators to continuously feed fully tangled woven sacks, heavy FIBC waste, and loose raffia threads directly into the high-volume hopper. It instantly shreds the bulky material into clean, uniform strands. Simultaneously, a dedicated pneumatic suction hose—which connects to an external dust collection chamber—actively vacuums away the fine dust, leaving you with premium, extruder-ready regrind.

• Heavy-Duty Scissor-Cut Rotor: Designed with a high-shear, open-rotor cutting mechanism that slices through tough, tangled PP/HDPE fabric instantly without wrapping around the shaft or stalling the motor.

• Integrated Pneumatic Dust Extraction: Features a powerful, dedicated suction pipe connected directly to the cutting chamber. This hose connects to a dust collection chamber to actively pull dirt, micro-fines, and airborne dust away from the cut material.

• High-Volume Top Feed Hopper: Built with an oversized feeding chute that allows operators to easily load large, bulky handfuls of tangled raffia or full woven sacks without the need for pre-cutting.

• Rapid Side-Discharge System: The machine quickly ejects the clean, cut fibers through a wide discharge chute, preventing internal material build-up and allowing for high-speed continuous feeding.

• Vibration-Free Industrial Build: Constructed on a robust steel chassis to withstand the heavy impact of shredding thick woven fabrics over long 24/7 production shifts.

• 100% Tangle-Free Operation: Completely eliminates the need to stop production to manually cut away melted or tangled plastic strings from a choked grinder rotor.

• Protects Downstream Extruders: By actively vacuuming out the abrasive dust before it mixes with the regrind, you drastically reduce extruder screen blockages and improve your final Dana (granule) quality.

• Cleaner Factory Environment: The suction system and collection chamber capture the fine plastic powder that would normally float around the factory floor, ensuring a safer, breathable workspace for your operators.

• Labor & Time Efficient: Operators can continuously feed the machine at high speeds without worrying about jamming, maximizing your daily scrap recovery rate.

This specialized cutting system is the only reliable way to process:

• Woven Sack Waste: Used/Rejected PP cement bags, fertilizer sacks, and fabric rolls.

• Raffia Tape & Thread: Tangled extrusion edge trims, bobbin waste, and multi-filament yarns.

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Vardhman Industries manufactures robust Heavy Duty Plastic Scrap Crushers, engineered specifically for the highly efficient size reduction of polymer waste. Designed exclusively for plastic materials, these industrial Grinders easily power through rigid plastics, thick lumps, and bulky scrap to produce uniform, high-quality regrind.

Whether you are crushing PET bottles, HDPE drums, or tough PP automotive parts, our grinders deliver massive throughput with minimal dust generation, ensuring your scrap is perfectly prepped for washing or direct extrusion.

• Optimized Cutting Geometry: Features a V-cut or staggered rotor design that provides a high-shear "scissor action." This reduces motor strain, lowers power consumption, and minimizes the creation of unusable plastic dust/fines.

• Premium Tool Steel Blades: Equipped with high-carbon, wear-resistant steel blades that hold their edge longer, drastically reducing the frequency of blade sharpening and replacement.

• Heavy-Duty Rotor & Bearings: Built with oversized, outboard bearings separated from the cutting chamber to prevent plastic dust from entering and causing mechanical failure.

• Easy-Access Cutting Chamber: Designed with a split-housing or hydraulic opening mechanism, allowing operators to quickly open the machine for fast cleaning, blade adjustments, and screen changes.

• Anti-Flyback Hopper: Specially engineered feeding hopper with heavy-duty safety flaps to prevent plastic shards from flying back out, ensuring maximum operator safety.

• Uniform Flake Quality: Produces consistent, evenly sized flakes that melt smoothly in your extruders, improving the quality of your final "dana".

• Maximum Uptime: Quick-access design means your team spends less time cleaning the machine during color or material changes and more time producing.

• Rugged Durability: A heavy-steel welded frame absorbs intense vibrations, allowing the machine to run 24/7 without structural fatigue.

This machine is built to handle tough polymer scrap, including:

• Rigid Plastics: HDPE milk crates, industrial drums, and heavy containers.

• PET & Blow Molding: High-volume PET bottle crushing and jerry cans.

• Thick-Walled Scrap: PVC/HDPE pipes, injection molding rejects, and extrusion lumps (purgings).

Processing PP and HDPE raffia waste requires highly specialized equipment. Standard granulators simply cannot handle woven sack waste—they choke on the stringy tapes, and the grinding process creates a massive cloud of micro-dust that ultimately blocks your extruder screens. The Raffia Scrap Cutting & Dust Removing Machine by Vardhman Industries is explicitly designed to solve this.

This machine allows operators to continuously feed fully tangled woven sacks, heavy FIBC waste, and loose raffia threads directly into the high-volume hopper. It instantly shreds the bulky material into clean, uniform strands. Simultaneously, a dedicated pneumatic suction hose—which connects to an external dust collection chamber—actively vacuums away the fine dust, leaving you with premium, extruder-ready regrind.

• Heavy-Duty Scissor-Cut Rotor: Designed with a high-shear, open-rotor cutting mechanism that slices through tough, tangled PP/HDPE fabric instantly without wrapping around the shaft or stalling the motor.

• Integrated Pneumatic Dust Extraction: Features a powerful, dedicated suction pipe connected directly to the cutting chamber. This hose connects to a dust collection chamber to actively pull dirt, micro-fines, and airborne dust away from the cut material.

• High-Volume Top Feed Hopper: Built with an oversized feeding chute that allows operators to easily load large, bulky handfuls of tangled raffia or full woven sacks without the need for pre-cutting.

• Rapid Side-Discharge System: The machine quickly ejects the clean, cut fibers through a wide discharge chute, preventing internal material build-up and allowing for high-speed continuous feeding.

• Vibration-Free Industrial Build: Constructed on a robust steel chassis to withstand the heavy impact of shredding thick woven fabrics over long 24/7 production shifts.

• 100% Tangle-Free Operation: Completely eliminates the need to stop production to manually cut away melted or tangled plastic strings from a choked grinder rotor.

• Protects Downstream Extruders: By actively vacuuming out the abrasive dust before it mixes with the regrind, you drastically reduce extruder screen blockages and improve your final Dana (granule) quality.

• Cleaner Factory Environment: The suction system and collection chamber capture the fine plastic powder that would normally float around the factory floor, ensuring a safer, breathable workspace for your operators.

• Labor & Time Efficient: Operators can continuously feed the machine at high speeds without worrying about jamming, maximizing your daily scrap recovery rate.

This specialized cutting system is the only reliable way to process:

• Woven Sack Waste: Used/Rejected PP cement bags, fertilizer sacks, and fabric rolls.

• Raffia Tape & Thread: Tangled extrusion edge trims, bobbin waste, and multi-filament yarns.

Processing PP and HDPE raffia waste requires highly specialized equipment. Standard granulators simply cannot handle woven sack waste—they choke on the stringy tapes, and the grinding process creates a massive cloud of micro-dust that ultimately blocks your extruder screens. The Raffia Scrap Cutting & Dust Removing Machine by Vardhman Industries is explicitly designed to solve this.

This machine allows operators to continuously feed fully tangled woven sacks, heavy FIBC waste, and loose raffia threads directly into the high-volume hopper. It instantly shreds the bulky material into clean, uniform strands. Simultaneously, a dedicated pneumatic suction hose—which connects to an external dust collection chamber—actively vacuums away the fine dust, leaving you with premium, extruder-ready regrind.

• Heavy-Duty Scissor-Cut Rotor: Designed with a high-shear, open-rotor cutting mechanism that slices through tough, tangled PP/HDPE fabric instantly without wrapping around the shaft or stalling the motor.

• Integrated Pneumatic Dust Extraction: Features a powerful, dedicated suction pipe connected directly to the cutting chamber. This hose connects to a dust collection chamber to actively pull dirt, micro-fines, and airborne dust away from the cut material.

• High-Volume Top Feed Hopper: Built with an oversized feeding chute that allows operators to easily load large, bulky handfuls of tangled raffia or full woven sacks without the need for pre-cutting.

• Rapid Side-Discharge System: The machine quickly ejects the clean, cut fibers through a wide discharge chute, preventing internal material build-up and allowing for high-speed continuous feeding.

• Vibration-Free Industrial Build: Constructed on a robust steel chassis to withstand the heavy impact of shredding thick woven fabrics over long 24/7 production shifts.

• 100% Tangle-Free Operation: Completely eliminates the need to stop production to manually cut away melted or tangled plastic strings from a choked grinder rotor.

• Protects Downstream Extruders: By actively vacuuming out the abrasive dust before it mixes with the regrind, you drastically reduce extruder screen blockages and improve your final Dana (granule) quality.

• Cleaner Factory Environment: The suction system and collection chamber capture the fine plastic powder that would normally float around the factory floor, ensuring a safer, breathable workspace for your operators.

• Labor & Time Efficient: Operators can continuously feed the machine at high speeds without worrying about jamming, maximizing your daily scrap recovery rate.

This specialized cutting system is the only reliable way to process:

• Woven Sack Waste: Used/Rejected PP cement bags, fertilizer sacks, and fabric rolls.

• Raffia Tape & Thread: Tangled extrusion edge trims, bobbin waste, and multi-filament yarns.

Processing PP and HDPE raffia waste requires highly specialized equipment. Standard granulators simply cannot handle woven sack waste—they choke on the stringy tapes, and the grinding process creates a massive cloud of micro-dust that ultimately blocks your extruder screens. The Raffia Scrap Cutting & Dust Removing Machine by Vardhman Industries is explicitly designed to solve this.

This machine allows operators to continuously feed fully tangled woven sacks, heavy FIBC waste, and loose raffia threads directly into the high-volume hopper. It instantly shreds the bulky material into clean, uniform strands. Simultaneously, a dedicated pneumatic suction hose—which connects to an external dust collection chamber—actively vacuums away the fine dust, leaving you with premium, extruder-ready regrind.

• Heavy-Duty Scissor-Cut Rotor: Designed with a high-shear, open-rotor cutting mechanism that slices through tough, tangled PP/HDPE fabric instantly without wrapping around the shaft or stalling the motor.

• Integrated Pneumatic Dust Extraction: Features a powerful, dedicated suction pipe connected directly to the cutting chamber. This hose connects to a dust collection chamber to actively pull dirt, micro-fines, and airborne dust away from the cut material.

• High-Volume Top Feed Hopper: Built with an oversized feeding chute that allows operators to easily load large, bulky handfuls of tangled raffia or full woven sacks without the need for pre-cutting.

• Rapid Side-Discharge System: The machine quickly ejects the clean, cut fibers through a wide discharge chute, preventing internal material build-up and allowing for high-speed continuous feeding.

• Vibration-Free Industrial Build: Constructed on a robust steel chassis to withstand the heavy impact of shredding thick woven fabrics over long 24/7 production shifts.

• 100% Tangle-Free Operation: Completely eliminates the need to stop production to manually cut away melted or tangled plastic strings from a choked grinder rotor.

• Protects Downstream Extruders: By actively vacuuming out the abrasive dust before it mixes with the regrind, you drastically reduce extruder screen blockages and improve your final Dana (granule) quality.

• Cleaner Factory Environment: The suction system and collection chamber capture the fine plastic powder that would normally float around the factory floor, ensuring a safer, breathable workspace for your operators.

• Labor & Time Efficient: Operators can continuously feed the machine at high speeds without worrying about jamming, maximizing your daily scrap recovery rate.

This specialized cutting system is the only reliable way to process:

• Woven Sack Waste: Used/Rejected PP cement bags, fertilizer sacks, and fabric rolls.

• Raffia Tape & Thread: Tangled extrusion edge trims, bobbin waste, and multi-filament yarns.

Processing PP and HDPE raffia waste requires highly specialized equipment. Standard granulators simply cannot handle woven sack waste—they choke on the stringy tapes, and the grinding process creates a massive cloud of micro-dust that ultimately blocks your extruder screens. The Raffia Scrap Cutting & Dust Removing Machine by Vardhman Industries is explicitly designed to solve this.

This machine allows operators to continuously feed fully tangled woven sacks, heavy FIBC waste, and loose raffia threads directly into the high-volume hopper. It instantly shreds the bulky material into clean, uniform strands. Simultaneously, a dedicated pneumatic suction hose—which connects to an external dust collection chamber—actively vacuums away the fine dust, leaving you with premium, extruder-ready regrind.

• Heavy-Duty Scissor-Cut Rotor: Designed with a high-shear, open-rotor cutting mechanism that slices through tough, tangled PP/HDPE fabric instantly without wrapping around the shaft or stalling the motor.

• Integrated Pneumatic Dust Extraction: Features a powerful, dedicated suction pipe connected directly to the cutting chamber. This hose connects to a dust collection chamber to actively pull dirt, micro-fines, and airborne dust away from the cut material.

• High-Volume Top Feed Hopper: Built with an oversized feeding chute that allows operators to easily load large, bulky handfuls of tangled raffia or full woven sacks without the need for pre-cutting.

• Rapid Side-Discharge System: The machine quickly ejects the clean, cut fibers through a wide discharge chute, preventing internal material build-up and allowing for high-speed continuous feeding.

• Vibration-Free Industrial Build: Constructed on a robust steel chassis to withstand the heavy impact of shredding thick woven fabrics over long 24/7 production shifts.

• 100% Tangle-Free Operation: Completely eliminates the need to stop production to manually cut away melted or tangled plastic strings from a choked grinder rotor.

• Protects Downstream Extruders: By actively vacuuming out the abrasive dust before it mixes with the regrind, you drastically reduce extruder screen blockages and improve your final Dana (granule) quality.

• Cleaner Factory Environment: The suction system and collection chamber capture the fine plastic powder that would normally float around the factory floor, ensuring a safer, breathable workspace for your operators.

• Labor & Time Efficient: Operators can continuously feed the machine at high speeds without worrying about jamming, maximizing your daily scrap recovery rate.

This specialized cutting system is the only reliable way to process:

• Woven Sack Waste: Used/Rejected PP cement bags, fertilizer sacks, and fabric rolls.

• Raffia Tape & Thread: Tangled extrusion edge trims, bobbin waste, and multi-filament yarns.

Processing PP and HDPE raffia waste requires highly specialized equipment. Standard granulators simply cannot handle woven sack waste—they choke on the stringy tapes, and the grinding process creates a massive cloud of micro-dust that ultimately blocks your extruder screens. The Raffia Scrap Cutting & Dust Removing Machine by Vardhman Industries is explicitly designed to solve this.

This machine allows operators to continuously feed fully tangled woven sacks, heavy FIBC waste, and loose raffia threads directly into the high-volume hopper. It instantly shreds the bulky material into clean, uniform strands. Simultaneously, a dedicated pneumatic suction hose—which connects to an external dust collection chamber—actively vacuums away the fine dust, leaving you with premium, extruder-ready regrind.

• Heavy-Duty Scissor-Cut Rotor: Designed with a high-shear, open-rotor cutting mechanism that slices through tough, tangled PP/HDPE fabric instantly without wrapping around the shaft or stalling the motor.

• Integrated Pneumatic Dust Extraction: Features a powerful, dedicated suction pipe connected directly to the cutting chamber. This hose connects to a dust collection chamber to actively pull dirt, micro-fines, and airborne dust away from the cut material.

• High-Volume Top Feed Hopper: Built with an oversized feeding chute that allows operators to easily load large, bulky handfuls of tangled raffia or full woven sacks without the need for pre-cutting.

• Rapid Side-Discharge System: The machine quickly ejects the clean, cut fibers through a wide discharge chute, preventing internal material build-up and allowing for high-speed continuous feeding.

• Vibration-Free Industrial Build: Constructed on a robust steel chassis to withstand the heavy impact of shredding thick woven fabrics over long 24/7 production shifts.

• 100% Tangle-Free Operation: Completely eliminates the need to stop production to manually cut away melted or tangled plastic strings from a choked grinder rotor.

• Protects Downstream Extruders: By actively vacuuming out the abrasive dust before it mixes with the regrind, you drastically reduce extruder screen blockages and improve your final Dana (granule) quality.

• Cleaner Factory Environment: The suction system and collection chamber capture the fine plastic powder that would normally float around the factory floor, ensuring a safer, breathable workspace for your operators.

• Labor & Time Efficient: Operators can continuously feed the machine at high speeds without worrying about jamming, maximizing your daily scrap recovery rate.

This specialized cutting system is the only reliable way to process:

• Woven Sack Waste: Used/Rejected PP cement bags, fertilizer sacks, and fabric rolls.

• Raffia Tape & Thread: Tangled extrusion edge trims, bobbin waste, and multi-filament yarns.

Processing PP and HDPE raffia waste requires highly specialized equipment. Standard granulators simply cannot handle woven sack waste—they choke on the stringy tapes, and the grinding process creates a massive cloud of micro-dust that ultimately blocks your extruder screens. The Raffia Scrap Cutting & Dust Removing Machine by Vardhman Industries is explicitly designed to solve this.

This machine allows operators to continuously feed fully tangled woven sacks, heavy FIBC waste, and loose raffia threads directly into the high-volume hopper. It instantly shreds the bulky material into clean, uniform strands. Simultaneously, a dedicated pneumatic suction hose—which connects to an external dust collection chamber—actively vacuums away the fine dust, leaving you with premium, extruder-ready regrind.

• Heavy-Duty Scissor-Cut Rotor: Designed with a high-shear, open-rotor cutting mechanism that slices through tough, tangled PP/HDPE fabric instantly without wrapping around the shaft or stalling the motor.

• Integrated Pneumatic Dust Extraction: Features a powerful, dedicated suction pipe connected directly to the cutting chamber. This hose connects to a dust collection chamber to actively pull dirt, micro-fines, and airborne dust away from the cut material.

• High-Volume Top Feed Hopper: Built with an oversized feeding chute that allows operators to easily load large, bulky handfuls of tangled raffia or full woven sacks without the need for pre-cutting.

• Rapid Side-Discharge System: The machine quickly ejects the clean, cut fibers through a wide discharge chute, preventing internal material build-up and allowing for high-speed continuous feeding.

• Vibration-Free Industrial Build: Constructed on a robust steel chassis to withstand the heavy impact of shredding thick woven fabrics over long 24/7 production shifts.

• 100% Tangle-Free Operation: Completely eliminates the need to stop production to manually cut away melted or tangled plastic strings from a choked grinder rotor.

• Protects Downstream Extruders: By actively vacuuming out the abrasive dust before it mixes with the regrind, you drastically reduce extruder screen blockages and improve your final Dana (granule) quality.

• Cleaner Factory Environment: The suction system and collection chamber capture the fine plastic powder that would normally float around the factory floor, ensuring a safer, breathable workspace for your operators.

• Labor & Time Efficient: Operators can continuously feed the machine at high speeds without worrying about jamming, maximizing your daily scrap recovery rate.

This specialized cutting system is the only reliable way to process:

• Woven Sack Waste: Used/Rejected PP cement bags, fertilizer sacks, and fabric rolls.

• Raffia Tape & Thread: Tangled extrusion edge trims, bobbin waste, and multi-filament yarns.